张拉裂缝在煤−岩界面处的跨界面扩展行为

Research on cross-interface behaviors of tension fractures at coal-rock interface

  • 摘要: 为深入认识张拉作用下裂缝在煤−岩界面处的复杂扩展行为及其控制机制,通过巴西劈裂试验,采用数字图像相关(Digital Image Correlation, DIC)、声发射监测和高速摄像机观测等手段,系统研究了张拉裂缝以不同角度逼近煤−岩界面时的时空演化特征,探讨了张拉裂缝在煤−岩界面处的跨界面扩展行为及其控制机制。结果表明:巴西劈裂时,裂缝均自煤体张拉起裂,随后近似沿加载直径扩展至煤−岩界面处时会发生转向、止裂或穿过等复杂扩展行为,且在界面附近会发生非平面扭曲;裂缝跨过煤−岩界面后,在拉应力作用下会再次转向至加载直径方向,形成弧形扩展路径。当裂缝沿煤−岩界面扩展时,一般在强度较低的煤侧,扩展形态较简单;当裂缝以锐角扩展至煤−岩界面时,会转向至界面扩展一段距离,而后再次转向至最大拉应力方向,扩展形态较复杂;当裂缝垂直扩展至煤−岩界面时,会直接穿过界面,扩展形态较简单。裂纹几何特征、扩展路径、DIC数字图像相关获得的试样表面位移场和声发射事件RA(上升时间/振幅)值和AF(平均频率)值等均表明,煤−岩组合试样巴西劈裂时发生的主要为张拉破裂,即使裂纹发生转向或转折,主要破裂机制仍是张拉破裂。研究结果对深入认识张拉裂缝在煤−岩界面处的跨界面扩展行为及其控制机制等具有重要的理论指导作用。

     

    Abstract: In order to deeply understand the complex fracture propagation mechanisms and control mechanism in the interface of coal-rock under tension, Brazilian tests were performed on coal-rock specimens in various approximation angle with respect to the loading direction to study the fracture propagation patterns on the temporal and spatial evolution and then to explore the fracture cross interface propagation mechanisms and control mechanism under tension, assist by Digital Image Correlation (DIC), Acoustic Emission (AE) and high-speed camera. For Brazilian condition, it is shown that tension fractures initiation in coal, then propagates nearly alone the loading direction to coal-rock interface, and non-planar distortion occurs near the interface, producing a complex fracture pattern with fracture branching, deflection and penetration. When the fracture cross the interface, the fracture usually turn to the loading direction due to the local stress, producing arc-shaped fracture path. When the fracture propagate alone the coal-rock interface, the fracture propagate mainly in the lower strength side of the coal-rock combination, producing simple fracture pattern. The fracture primarily turns to interface and propagate alone the interface for a length, then towards to the principal stress, producing complex fracture path, when it propagates to the interface at an acute angle. Meanwhile, when the fracture is perpendicular to the interface, it will penetrate the interface, producing simple fracture pattern. Brazilian tests of coal-rock combined specimens show that: The main fracture behavior is tension fracture, even the fracture occurs deflection or inflection which does not change the main behavior, obtained by the finally fracture geometry, the propagation path, the surface displacement field acquire by DIC data and the RA value by AE. The research results provide important theoretical guidance for deeply understanding of the cross-interface propagation behavior and control mechanism of tensile fractures at the coal-rock interface.

     

/

返回文章
返回