田忠斌, 魏书宏, 王建青, 李莲英, 唐书恒, 李俊. 沁水盆地中东部海陆过渡相页岩微观孔隙结构特征[J]. 煤炭学报, 2017, (7). DOI: 10.13225/j.cnki.jccs.2016.1430
引用本文: 田忠斌, 魏书宏, 王建青, 李莲英, 唐书恒, 李俊. 沁水盆地中东部海陆过渡相页岩微观孔隙结构特征[J]. 煤炭学报, 2017, (7). DOI: 10.13225/j.cnki.jccs.2016.1430
TIAN Zhong-bin, WEI Shu-hong, WANG Jian-qing, LI Lian-ying, TANG Shu-heng, LI Jun. Characteristics of micro-scale pore structures of marine-continental transitional shale from the mid-eastern area,Qinshui Basin[J]. Journal of China Coal Society, 2017, (7). DOI: 10.13225/j.cnki.jccs.2016.1430
Citation: TIAN Zhong-bin, WEI Shu-hong, WANG Jian-qing, LI Lian-ying, TANG Shu-heng, LI Jun. Characteristics of micro-scale pore structures of marine-continental transitional shale from the mid-eastern area,Qinshui Basin[J]. Journal of China Coal Society, 2017, (7). DOI: 10.13225/j.cnki.jccs.2016.1430

沁水盆地中东部海陆过渡相页岩微观孔隙结构特征

Characteristics of micro-scale pore structures of marine-continental transitional shale from the mid-eastern area,Qinshui Basin

  • 摘要: 为探究沁水盆地石炭二叠系海陆过渡相页岩微观孔隙结构特征,运用扫描电镜、低温氮吸附实验和高压压汞实验等手段,分析了海陆过渡相页岩储层的孔隙类型、形态、孔径分布等特征。结果表明:研究区海陆过渡相页岩纳米级孔隙广泛发育,孔隙类型以有机质孔为主,同时亦发育大量的矿物粒间孔和部分粒内孔;孔隙形态以平行板状居多,还包括一定量的狭缝型孔,以及少量墨水瓶型孔和一端封闭的孔隙;页岩孔径分布范围跨度较大,介孔(2~50 nm)是研究区页岩纳米级孔隙的主体,提供的比表面积和孔体积均达到60%以上,微孔对比表面积的贡献同样值得重视。有机质孔以微孔为主,其发育程度对页岩气的吸附存储有重要影响,TOC含量是BET比表面积和BJH孔体积的重要控制因素;黏土矿物提供了大量介孔,其含量对比表面积和孔体积同样具有控制作用。

     

    Abstract: In order to study the pore characteristics of the Permo-Carboniferous shale, some experiments including scanning electron microscope,nitrogen sorption-desorption experiments and mercury intrusion method were conducted to analyze the characteristics of the pore types,pore morphology,and pore size distribution. The results show that the nano-scaled pores in marine-continental transitional shale developed widely. Organic pores were the main pore type, and many intergranular pores with some intragranular pores were also found in the shale. The pores were mainly slit- shaped and parallel-plate. The meso-pores with the 2 -50 nm pore size distribution were the main body of the nano- scaled pores,and they made a major contribution to pore specific surface area and pore volume in a common content of over 60% . The micro-pores also provided a considerable value of the surface area. Organic pores were primarily the micro-pores,and the TOC content was an important controlling factor of BET surface area and BJH pore volume. The content of clay minerals with a large quantity of meso-pores also had an effect on the value of surface area and pore volume.

     

/

返回文章
返回